Other Products ｜Glaxs Pure White- SINGLE PIECE

Glaxs Pure White is a 215ml 2:1 bi-component cartridge glue for indoor and outdoor bonding of ceramic, porcelain, and similar surfaces
Glaxs Pure White is a high adhesion system for indoor and outdoor bonding of ceramic, porcelain and similar surfaces. Available in a wide variety of colors. Requires use of special M200XMR Cartridge Gun.
Features

VOC free
Excellent adhesion
Ultra rapid
Excellent color stability to sunlight
Glossy, shiny and easy to polish
Indoor and Outdoor use
Pre-dosed for easy dispensing
Comes with 2 mixing nozzles

Instructions

All the surfaces to be treated must be cleaned and free of dust and grease.
In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
Remove the threaded extremity and uncap the cartridge.
Fix the mixer to the cartridge through the threaded nozzle.
Before applying the glue on the surfaces, do spurge around 5 gr in line.
Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.

Shelf Life
Glaxs Pure White in cartridge will last at least 12 months, in normal conditions between 18-25°c, kept away from source of heat, humidity and sun light.
Safety
Resin and hardener are chemical products, please read the safety data sheet before usage and the rules written on the product label.

Gel time in bulk at 77°: 3-5 min
Tacky free time at 77°: approx. 15 min
Working time at 77°: 45-60 min
Temp range for use after hardening: -13°F to 140°F

SDS Part A Report
SDS Part B Report
TDS Printable

Technical Data for Glaxs Pure White

Viscosity cps 25°C 20 r.p.m (ASTM D2196)
tixotropic liquid

Density at 25°C gr/cm3

1.27

Aspect
colored liquid

Ratio of use glue/hardener
2+1

Gel time (in bulk) at 25°C in min
3-5 min

Time for handling pieces
15-20 min

Working time suggested at 25°C in min
45-60 min

Minimum reaction temperature
+1°C

Minimun temperature of use after hardening
-25°C

Minimun temperature of use after hardening
+60°C

Shelf life at 18-20°C
24 months

Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 10.0

Adhesion force in MPa at 25°C on natural stone, diamond cut surface after 24 hours (ASTM D 4541)*
9.5 - 10.5

Adhesion force in MPa at 25°C on quartz, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 10.0

Adhesion force in MPa at 25°C on quartz, diamond cut surface after 24 hours (ASTM D 4541)*
12.0 - 13.0

Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 1 hour (ASTM D 4541)*
9.0 - 11.0

Adhesion force in MPa at 25°C on ceramic, diamond cut surface after 24 hours (ASTM D 4541)*
10.0 - 13.0
Brand:TenaxCategory:AdhesivesSKU:1SGLAXSCPUREWHITETags:Stone Adhesive