No image available
Electronic Accessories ｜Carpuride CG01 Smart USB-C Motorcycle Battery Charger with LED Display
USD 24.00
Electronics / Electronic Accessories / Electronic Accessories
LED Display Function Description:1. Power On: After power is supplied, the Display shows the current vehicle battery voltage. Maximum Displayed voltage:19.9V(The device operates only when both ACC and B+ are connected. If the ACC connection is disconnected, the device will stop working.)
2. Battery Type Selection: By default, the charger is set to Lead-Acid Battery Mode (SLA) after power-on.To change the battery type:Press and hold the K1 button for approximately 5 seconds. The SLA and LION indicators will SLAsh simultaneously.While SLAshing: Press K1 once to select Lead-Acid Battery Mode (SLA). SLA indicator ON; LION indicator OFFPress K1 again to select Lithium Battery Mode (LION).LION indicator ON; SLA indicator OFFRepeat as needed to switch between battery types.Important:If your moto uses a lead-acid battery, the default setting can be used without adjustment. If your moto uses a lithium battery, switch the charger to LlON mode before use.If no button operation is performed for 5 seconds, the device will automatically exit battery selection mode.
3. Discharge ModeThe charger defaults to Discharge Mode after startup. The OUT indicator lights up. External devices can be charged through the USB-C ports.Note: Short-press the K1 button to switch between charging and discharging modes.
4. Charge ModeWhile in Discharge Mode, short-press the K1 button: The IN indicator lights up. The device enters Charge Mode. In this mode, an external power source (such as a power bank) can be used to charge the vehicle battery.Note: Repeated short presses of the K1 button allow switching between Charge Mode and Discharge Mode.
5. 2USB ports: USB1,USB2USB1: Supports discharge/output only.Maximum output power: 20WVoltage/Current Output: 5V/3A,9V/2A,12V/1.67AUSB2: Supports both charging (input) and discharging (output);Maximum charging input power:100W;Maximum output power:100wVoltage/Current Output:5V/3A,9V/2A,12V/1.67A
Note: The positive and negative power input is 12v (operable within the 11-16V range)
Precautions:1. Low Voltage Protection: When operating in Discharge Mode, if the vehicle battery voltage drops below approximately 11.0V, the discharge function will automatically shut down. When battery voltage recovers to approximately 11.8V, discharge operation will automatically resume.Recommendation: To avoid draining the vehicle battery, use thedischarge function after the engine has been started.
2. Device Compatibility: Due to the wide variety of charging protocols used by electronic devices, some devices may not fully support or be compatible with the charging protocols provided by this product.This is a normal compatibility limitation and does not indicate aproduct malfunction.
Brand:carpurideSKU:CG01
View product2. Battery Type Selection: By default, the charger is set to Lead-Acid Battery Mode (SLA) after power-on.To change the battery type:Press and hold the K1 button for approximately 5 seconds. The SLA and LION indicators will SLAsh simultaneously.While SLAshing: Press K1 once to select Lead-Acid Battery Mode (SLA). SLA indicator ON; LION indicator OFFPress K1 again to select Lithium Battery Mode (LION).LION indicator ON; SLA indicator OFFRepeat as needed to switch between battery types.Important:If your moto uses a lead-acid battery, the default setting can be used without adjustment. If your moto uses a lithium battery, switch the charger to LlON mode before use.If no button operation is performed for 5 seconds, the device will automatically exit battery selection mode.
3. Discharge ModeThe charger defaults to Discharge Mode after startup. The OUT indicator lights up. External devices can be charged through the USB-C ports.Note: Short-press the K1 button to switch between charging and discharging modes.
4. Charge ModeWhile in Discharge Mode, short-press the K1 button: The IN indicator lights up. The device enters Charge Mode. In this mode, an external power source (such as a power bank) can be used to charge the vehicle battery.Note: Repeated short presses of the K1 button allow switching between Charge Mode and Discharge Mode.
5. 2USB ports: USB1,USB2USB1: Supports discharge/output only.Maximum output power: 20WVoltage/Current Output: 5V/3A,9V/2A,12V/1.67AUSB2: Supports both charging (input) and discharging (output);Maximum charging input power:100W;Maximum output power:100wVoltage/Current Output:5V/3A,9V/2A,12V/1.67A
Note: The positive and negative power input is 12v (operable within the 11-16V range)
Precautions:1. Low Voltage Protection: When operating in Discharge Mode, if the vehicle battery voltage drops below approximately 11.0V, the discharge function will automatically shut down. When battery voltage recovers to approximately 11.8V, discharge operation will automatically resume.Recommendation: To avoid draining the vehicle battery, use thedischarge function after the engine has been started.
2. Device Compatibility: Due to the wide variety of charging protocols used by electronic devices, some devices may not fully support or be compatible with the charging protocols provided by this product.This is a normal compatibility limitation and does not indicate aproduct malfunction.
Brand:carpurideSKU:CG01
Product details
LED Display Function Description:1. Power On: After power is supplied, the Display shows the current vehicle battery voltage. Maximum Displayed voltage:19.9V(The device operates only when both ACC and B+ are connected. If the ACC connection is disconnected, the device will stop working.)
2. Battery Type Selection: By default, the charger is set to Lead-Acid Battery Mode (SLA) after power-on.To change the battery type:Press and hold the K1 button for approximately 5 seconds. The SLA and LION indicators will SLAsh simultaneously.While SLAshing: Press K1 once to select Lead-Acid Battery Mode (SLA). SLA indicator ON; LION indicator OFFPress K1 again to select Lithium Battery Mode (LION).LION indicator ON; SLA indicator OFFRepeat as needed to switch between battery types.Important:If your moto uses a lead-acid battery, the default setting can be used without adjustment. If your moto uses a lithium battery, switch the charger to LlON mode before use.If no button operation is performed for 5 seconds, the device will automatically exit battery selection mode.
3. Discharge ModeThe charger defaults to Discharge Mode after startup. The OUT indicator lights up. External devices can be charged through the USB-C ports.Note: Short-press the K1 button to switch between charging and discharging modes.
4. Charge ModeWhile in Discharge Mode, short-press the K1 button: The IN indicator lights up. The device enters Charge Mode. In this mode, an external power source (such as a power bank) can be used to charge the vehicle battery.Note: Repeated short presses of the K1 button allow switching between Charge Mode and Discharge Mode.
5. 2USB ports: USB1,USB2USB1: Supports discharge/output only.Maximum output power: 20WVoltage/Current Output: 5V/3A,9V/2A,12V/1.67AUSB2: Supports both charging (input) and discharging (output);Maximum charging input power:100W;Maximum output power:100wVoltage/Current Output:5V/3A,9V/2A,12V/1.67A
Note: The positive and negative power input is 12v (operable within the 11-16V range)
Precautions:1. Low Voltage Protection: When operating in Discharge Mode, if the vehicle battery voltage drops below approximately 11.0V, the discharge function will automatically shut down. When battery voltage recovers to approximately 11.8V, discharge operation will automatically resume.Recommendation: To avoid draining the vehicle battery, use thedischarge function after the engine has been started.
2. Device Compatibility: Due to the wide variety of charging protocols used by electronic devices, some devices may not fully support or be compatible with the charging protocols provided by this product.This is a normal compatibility limitation and does not indicate aproduct malfunction.
Brand:carpurideSKU:CG01
2. Battery Type Selection: By default, the charger is set to Lead-Acid Battery Mode (SLA) after power-on.To change the battery type:Press and hold the K1 button for approximately 5 seconds. The SLA and LION indicators will SLAsh simultaneously.While SLAshing: Press K1 once to select Lead-Acid Battery Mode (SLA). SLA indicator ON; LION indicator OFFPress K1 again to select Lithium Battery Mode (LION).LION indicator ON; SLA indicator OFFRepeat as needed to switch between battery types.Important:If your moto uses a lead-acid battery, the default setting can be used without adjustment. If your moto uses a lithium battery, switch the charger to LlON mode before use.If no button operation is performed for 5 seconds, the device will automatically exit battery selection mode.
3. Discharge ModeThe charger defaults to Discharge Mode after startup. The OUT indicator lights up. External devices can be charged through the USB-C ports.Note: Short-press the K1 button to switch between charging and discharging modes.
4. Charge ModeWhile in Discharge Mode, short-press the K1 button: The IN indicator lights up. The device enters Charge Mode. In this mode, an external power source (such as a power bank) can be used to charge the vehicle battery.Note: Repeated short presses of the K1 button allow switching between Charge Mode and Discharge Mode.
5. 2USB ports: USB1,USB2USB1: Supports discharge/output only.Maximum output power: 20WVoltage/Current Output: 5V/3A,9V/2A,12V/1.67AUSB2: Supports both charging (input) and discharging (output);Maximum charging input power:100W;Maximum output power:100wVoltage/Current Output:5V/3A,9V/2A,12V/1.67A
Note: The positive and negative power input is 12v (operable within the 11-16V range)
Precautions:1. Low Voltage Protection: When operating in Discharge Mode, if the vehicle battery voltage drops below approximately 11.0V, the discharge function will automatically shut down. When battery voltage recovers to approximately 11.8V, discharge operation will automatically resume.Recommendation: To avoid draining the vehicle battery, use thedischarge function after the engine has been started.
2. Device Compatibility: Due to the wide variety of charging protocols used by electronic devices, some devices may not fully support or be compatible with the charging protocols provided by this product.This is a normal compatibility limitation and does not indicate aproduct malfunction.
Brand:carpurideSKU:CG01
Product information
COL-182b9be119cf26b7e3ac7a8ee9e97cc0a6fe42c6
Electronics / Electronic Accessories / Electronic Accessories
Electronics / Electronic Accessories / Electronic Accessories
