No image available
Best Seller｜Cobble Coat High Solids｜ Outerwear
USD 29.70
Clothing / Unisex Clothing / Outerwear
Cobble Coat High Solids is a crystal clear, solvent-based sealer designed to protect and beautify brick pavers, concrete floors, and Texture Deck.
Providing an enhanced, wet look appearance with semi-gloss finish, Cobble Coat High Solids is made from 100% acrylic resins and is higher in solids than most conventional concrete sealers. Cobble Coat High Solids provides water and UV light resistance with unusually good adhesion to a variety of substrates. Cobble Coat High Solids is recommended for application by contractors only. Each gallon of Cobble Coat High Solids will cover approximately 200 square feet per coat; the 5 gallon container of Cobble Coat High Solids will cover approximately 1,000 square feet. Coverage will depend on surface porosity, joint width and method of application. Second coat will take slightly less product.
Features
Wet look
Years of protection against sun and water damage
Helps prevent color of pavers from fading
Non-yellowing
Helps stabilize joints between pavers
Helps minimize mold and algae growth
Inhibits weeds and anthills
Applications
Clear coating to enhance and protect cement, pavers, and stone
Acrylic sealer for concrete, brick pavers, interlocking pavers, and other surfaces
One of the best paver sealers and stain protectants
Directions
Surfaces must be clean and dry before sealing. All grease, oil and potential contaminants must be removed.
Concrete should cure a minimum of 28 days before sealing.
Interlocking brick does not require etching.
Cobble Clean and Cobble Prep may be used for specific cleaning situations. Two thin coats provide the best results.
Do not apply Cobble Coat more frequently than every 18 months to avoid buildup of the sealer.
DO NOT thin material. Future applications should be applied in only one thin coat.
Cobble Coat High Solids is recommended for application by contractors only.
COBBLE COAT HIGH SOLIDS IS NOT RECOMMENDED FOR USE ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE.
READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT.
Technical Sheets
SDS Sheet
Brand:Surface LogixSKU:132-1GTags:Clearance, inventorytracked, SealersSize:1 Gallon, 5 Gallons
View productProviding an enhanced, wet look appearance with semi-gloss finish, Cobble Coat High Solids is made from 100% acrylic resins and is higher in solids than most conventional concrete sealers. Cobble Coat High Solids provides water and UV light resistance with unusually good adhesion to a variety of substrates. Cobble Coat High Solids is recommended for application by contractors only. Each gallon of Cobble Coat High Solids will cover approximately 200 square feet per coat; the 5 gallon container of Cobble Coat High Solids will cover approximately 1,000 square feet. Coverage will depend on surface porosity, joint width and method of application. Second coat will take slightly less product.
Features
Wet look
Years of protection against sun and water damage
Helps prevent color of pavers from fading
Non-yellowing
Helps stabilize joints between pavers
Helps minimize mold and algae growth
Inhibits weeds and anthills
Applications
Clear coating to enhance and protect cement, pavers, and stone
Acrylic sealer for concrete, brick pavers, interlocking pavers, and other surfaces
One of the best paver sealers and stain protectants
Directions
Surfaces must be clean and dry before sealing. All grease, oil and potential contaminants must be removed.
Concrete should cure a minimum of 28 days before sealing.
Interlocking brick does not require etching.
Cobble Clean and Cobble Prep may be used for specific cleaning situations. Two thin coats provide the best results.
Do not apply Cobble Coat more frequently than every 18 months to avoid buildup of the sealer.
DO NOT thin material. Future applications should be applied in only one thin coat.
Cobble Coat High Solids is recommended for application by contractors only.
COBBLE COAT HIGH SOLIDS IS NOT RECOMMENDED FOR USE ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE.
READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT.
Technical Sheets
SDS Sheet
Brand:Surface LogixSKU:132-1GTags:Clearance, inventorytracked, SealersSize:1 Gallon, 5 Gallons
Product details
Cobble Coat High Solids is a crystal clear, solvent-based sealer designed to protect and beautify brick pavers, concrete floors, and Texture Deck.
Providing an enhanced, wet look appearance with semi-gloss finish, Cobble Coat High Solids is made from 100% acrylic resins and is higher in solids than most conventional concrete sealers. Cobble Coat High Solids provides water and UV light resistance with unusually good adhesion to a variety of substrates. Cobble Coat High Solids is recommended for application by contractors only. Each gallon of Cobble Coat High Solids will cover approximately 200 square feet per coat; the 5 gallon container of Cobble Coat High Solids will cover approximately 1,000 square feet. Coverage will depend on surface porosity, joint width and method of application. Second coat will take slightly less product.
Features
Wet look
Years of protection against sun and water damage
Helps prevent color of pavers from fading
Non-yellowing
Helps stabilize joints between pavers
Helps minimize mold and algae growth
Inhibits weeds and anthills
Applications
Clear coating to enhance and protect cement, pavers, and stone
Acrylic sealer for concrete, brick pavers, interlocking pavers, and other surfaces
One of the best paver sealers and stain protectants
Directions
Surfaces must be clean and dry before sealing. All grease, oil and potential contaminants must be removed.
Concrete should cure a minimum of 28 days before sealing.
Interlocking brick does not require etching.
Cobble Clean and Cobble Prep may be used for specific cleaning situations. Two thin coats provide the best results.
Do not apply Cobble Coat more frequently than every 18 months to avoid buildup of the sealer.
DO NOT thin material. Future applications should be applied in only one thin coat.
Cobble Coat High Solids is recommended for application by contractors only.
COBBLE COAT HIGH SOLIDS IS NOT RECOMMENDED FOR USE ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE.
READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT.
Technical Sheets
SDS Sheet
Brand:Surface LogixSKU:132-1GTags:Clearance, inventorytracked, SealersSize:1 Gallon, 5 Gallons
Providing an enhanced, wet look appearance with semi-gloss finish, Cobble Coat High Solids is made from 100% acrylic resins and is higher in solids than most conventional concrete sealers. Cobble Coat High Solids provides water and UV light resistance with unusually good adhesion to a variety of substrates. Cobble Coat High Solids is recommended for application by contractors only. Each gallon of Cobble Coat High Solids will cover approximately 200 square feet per coat; the 5 gallon container of Cobble Coat High Solids will cover approximately 1,000 square feet. Coverage will depend on surface porosity, joint width and method of application. Second coat will take slightly less product.
Features
Wet look
Years of protection against sun and water damage
Helps prevent color of pavers from fading
Non-yellowing
Helps stabilize joints between pavers
Helps minimize mold and algae growth
Inhibits weeds and anthills
Applications
Clear coating to enhance and protect cement, pavers, and stone
Acrylic sealer for concrete, brick pavers, interlocking pavers, and other surfaces
One of the best paver sealers and stain protectants
Directions
Surfaces must be clean and dry before sealing. All grease, oil and potential contaminants must be removed.
Concrete should cure a minimum of 28 days before sealing.
Interlocking brick does not require etching.
Cobble Clean and Cobble Prep may be used for specific cleaning situations. Two thin coats provide the best results.
Do not apply Cobble Coat more frequently than every 18 months to avoid buildup of the sealer.
DO NOT thin material. Future applications should be applied in only one thin coat.
Cobble Coat High Solids is recommended for application by contractors only.
COBBLE COAT HIGH SOLIDS IS NOT RECOMMENDED FOR USE ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE.
READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT.
Technical Sheets
SDS Sheet
Brand:Surface LogixSKU:132-1GTags:Clearance, inventorytracked, SealersSize:1 Gallon, 5 Gallons
Product information
COL-385055ac772f798f2374716906179d8c6ac8c659
Clothing / Unisex Clothing / Outerwear
Clothing / Unisex Clothing / Outerwear