No image available
Skudo CURE｜ Other Products
USD 81.43
Other Products / General Merchandise / Other Products
Penetrating curing agent that enhances concrete strength and consistency without surface coatings.
Skudo CURE is a penetrating curing agent designed to improve concrete hydration by forming a sub-surface moisture barrier. This allows for more consistent curing, resulting in improved color uniformity and surface strength, even under construction traffic.
Unlike traditional curing compounds, Skudo CURE is non-film forming and dissipates naturally within 30 days without requiring UV exposure. This eliminates the need for grinding or chemical removal before applying decorative finishes, coatings, or flooring systems.
Ideal for decorative and polished concrete applications, Skudo CURE enhances abrasion resistance, reduces dusting, and creates a denser, harder surface while lowering labor costs associated with surface prep.
Features
Improves curing by retaining internal slab moisture
Reduces crazing and map cracking
Penetrating, non-film forming formula requires no removal
Creates a hydrophobic barrier for improved stain resistance
Increases abrasion resistance and surface hardness
Helps minimize efflorescence and concrete dusting
How to Apply
Store between 40°F and 105°F and keep from freezing
Do not mix or dilute with other chemicals
Apply to new concrete after bleed water has dissipated
Avoid over-burnishing the slab to ensure proper penetration
Use a low-pressure pump sprayer with a conical tip
Apply evenly in overlapping circular motions without puddling
Immediately spread using a microfiber pad for uniform coverage
Prevent overspray and rinse immediately if contact occurs
Apply before any soft cutting operations
Do not apply below 40°F (4.4°C)
Application Rate
Coverage
1,000 – 1,500 sq ft per gallon
Application Method
Low-pressure sprayer with microfiber pad
Cleaning
Clean tools with soap and water shortly after use
Remove wet overspray from glass or metal with soap and water
Use solvent cleaner to remove dried overspray as soon as possible
Supporting Documents
Skudo CURE Technical Data Sheet (TDS)
Skudo CURE SDS
Skudo CURE Application Guide
Brand:SkudoSKU:CTCURE5GALTags:Cementitious Products and LiquidsSize:5 Gallon (Coverage (sq. ft./gal): 5000-7000, 55 Gallon (sq. ft./gal): 55000-82500
View productSkudo CURE is a penetrating curing agent designed to improve concrete hydration by forming a sub-surface moisture barrier. This allows for more consistent curing, resulting in improved color uniformity and surface strength, even under construction traffic.
Unlike traditional curing compounds, Skudo CURE is non-film forming and dissipates naturally within 30 days without requiring UV exposure. This eliminates the need for grinding or chemical removal before applying decorative finishes, coatings, or flooring systems.
Ideal for decorative and polished concrete applications, Skudo CURE enhances abrasion resistance, reduces dusting, and creates a denser, harder surface while lowering labor costs associated with surface prep.
Features
Improves curing by retaining internal slab moisture
Reduces crazing and map cracking
Penetrating, non-film forming formula requires no removal
Creates a hydrophobic barrier for improved stain resistance
Increases abrasion resistance and surface hardness
Helps minimize efflorescence and concrete dusting
How to Apply
Store between 40°F and 105°F and keep from freezing
Do not mix or dilute with other chemicals
Apply to new concrete after bleed water has dissipated
Avoid over-burnishing the slab to ensure proper penetration
Use a low-pressure pump sprayer with a conical tip
Apply evenly in overlapping circular motions without puddling
Immediately spread using a microfiber pad for uniform coverage
Prevent overspray and rinse immediately if contact occurs
Apply before any soft cutting operations
Do not apply below 40°F (4.4°C)
Application Rate
Coverage
1,000 – 1,500 sq ft per gallon
Application Method
Low-pressure sprayer with microfiber pad
Cleaning
Clean tools with soap and water shortly after use
Remove wet overspray from glass or metal with soap and water
Use solvent cleaner to remove dried overspray as soon as possible
Supporting Documents
Skudo CURE Technical Data Sheet (TDS)
Skudo CURE SDS
Skudo CURE Application Guide
Brand:SkudoSKU:CTCURE5GALTags:Cementitious Products and LiquidsSize:5 Gallon (Coverage (sq. ft./gal): 5000-7000, 55 Gallon (sq. ft./gal): 55000-82500
Product details
Penetrating curing agent that enhances concrete strength and consistency without surface coatings.
Skudo CURE is a penetrating curing agent designed to improve concrete hydration by forming a sub-surface moisture barrier. This allows for more consistent curing, resulting in improved color uniformity and surface strength, even under construction traffic.
Unlike traditional curing compounds, Skudo CURE is non-film forming and dissipates naturally within 30 days without requiring UV exposure. This eliminates the need for grinding or chemical removal before applying decorative finishes, coatings, or flooring systems.
Ideal for decorative and polished concrete applications, Skudo CURE enhances abrasion resistance, reduces dusting, and creates a denser, harder surface while lowering labor costs associated with surface prep.
Features
Improves curing by retaining internal slab moisture
Reduces crazing and map cracking
Penetrating, non-film forming formula requires no removal
Creates a hydrophobic barrier for improved stain resistance
Increases abrasion resistance and surface hardness
Helps minimize efflorescence and concrete dusting
How to Apply
Store between 40°F and 105°F and keep from freezing
Do not mix or dilute with other chemicals
Apply to new concrete after bleed water has dissipated
Avoid over-burnishing the slab to ensure proper penetration
Use a low-pressure pump sprayer with a conical tip
Apply evenly in overlapping circular motions without puddling
Immediately spread using a microfiber pad for uniform coverage
Prevent overspray and rinse immediately if contact occurs
Apply before any soft cutting operations
Do not apply below 40°F (4.4°C)
Application Rate
Coverage
1,000 – 1,500 sq ft per gallon
Application Method
Low-pressure sprayer with microfiber pad
Cleaning
Clean tools with soap and water shortly after use
Remove wet overspray from glass or metal with soap and water
Use solvent cleaner to remove dried overspray as soon as possible
Supporting Documents
Skudo CURE Technical Data Sheet (TDS)
Skudo CURE SDS
Skudo CURE Application Guide
Brand:SkudoSKU:CTCURE5GALTags:Cementitious Products and LiquidsSize:5 Gallon (Coverage (sq. ft./gal): 5000-7000, 55 Gallon (sq. ft./gal): 55000-82500
Skudo CURE is a penetrating curing agent designed to improve concrete hydration by forming a sub-surface moisture barrier. This allows for more consistent curing, resulting in improved color uniformity and surface strength, even under construction traffic.
Unlike traditional curing compounds, Skudo CURE is non-film forming and dissipates naturally within 30 days without requiring UV exposure. This eliminates the need for grinding or chemical removal before applying decorative finishes, coatings, or flooring systems.
Ideal for decorative and polished concrete applications, Skudo CURE enhances abrasion resistance, reduces dusting, and creates a denser, harder surface while lowering labor costs associated with surface prep.
Features
Improves curing by retaining internal slab moisture
Reduces crazing and map cracking
Penetrating, non-film forming formula requires no removal
Creates a hydrophobic barrier for improved stain resistance
Increases abrasion resistance and surface hardness
Helps minimize efflorescence and concrete dusting
How to Apply
Store between 40°F and 105°F and keep from freezing
Do not mix or dilute with other chemicals
Apply to new concrete after bleed water has dissipated
Avoid over-burnishing the slab to ensure proper penetration
Use a low-pressure pump sprayer with a conical tip
Apply evenly in overlapping circular motions without puddling
Immediately spread using a microfiber pad for uniform coverage
Prevent overspray and rinse immediately if contact occurs
Apply before any soft cutting operations
Do not apply below 40°F (4.4°C)
Application Rate
Coverage
1,000 – 1,500 sq ft per gallon
Application Method
Low-pressure sprayer with microfiber pad
Cleaning
Clean tools with soap and water shortly after use
Remove wet overspray from glass or metal with soap and water
Use solvent cleaner to remove dried overspray as soon as possible
Supporting Documents
Skudo CURE Technical Data Sheet (TDS)
Skudo CURE SDS
Skudo CURE Application Guide
Brand:SkudoSKU:CTCURE5GALTags:Cementitious Products and LiquidsSize:5 Gallon (Coverage (sq. ft./gal): 5000-7000, 55 Gallon (sq. ft./gal): 55000-82500
Product information
COL-47d41c69862964357bbc4d58e4cfff4ec69439d9
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
