No image available
A Fresh Highlight｜Heavyweight Interfacing Nittobo［Hard］｜ Other Products
USD 0.47
Other Products / General Merchandise / Other Products
[Product description]
Fusible interfacing is adhered to fabric with an iron.When making clothes, bags, or small items, applying interfacing to fabric prevents deformation and makes wrinkles less likely even after repeated washing.
Heavyweight Interfacing Nittobo［Hard］
A dense and firm interfacing.Recommended when you want large bags to stand upright.Usage: bags, etc.Suitable materials: canvas, No.10 oxford (thicker than regular oxford), katsuragi, etc.Recommended iron temperature for fusing: 140–160℃*May not fuse well with household irons.
*Please refer to the “Fusible Interfacing Comparison Chart” image for stiffness and thickness of interfacing.*In the second image, the gray board is placed on the right half.
[How to Use]
The side with a shiny (reflective) or rough surface caused by adhesive resin is the adhesive side. Place this side down onto the back side of the fabric.
Set the iron to dry mode and press without sliding, holding about 10–15 seconds per spot.
[Notes]
Iron temperature varies by interfacing; please refer to the recommended temperature in the product description.
Use dry iron only; do not use steam.
Usage, suitable materials, iron temperature, and pressing time are guidelines. Please test with scraps before use.
When applied to sheer materials, adhesive resin may seep through or reduce transparency, so be cautious.
[Material]65% Polyester35% CottonMade in Japan
[Fabric Width]Approx. 90 cm
Brand:nomura tailorSKU:2-003-t121h-yTags: Craft & Sewing Accessories / Interfacing , Fabric / Shop by Fabric Type ( Gauze, Lace, Oxford, Tulle & More )/ Interlining Color:Y. White
View productFusible interfacing is adhered to fabric with an iron.When making clothes, bags, or small items, applying interfacing to fabric prevents deformation and makes wrinkles less likely even after repeated washing.
Heavyweight Interfacing Nittobo［Hard］
A dense and firm interfacing.Recommended when you want large bags to stand upright.Usage: bags, etc.Suitable materials: canvas, No.10 oxford (thicker than regular oxford), katsuragi, etc.Recommended iron temperature for fusing: 140–160℃*May not fuse well with household irons.
*Please refer to the “Fusible Interfacing Comparison Chart” image for stiffness and thickness of interfacing.*In the second image, the gray board is placed on the right half.
[How to Use]
The side with a shiny (reflective) or rough surface caused by adhesive resin is the adhesive side. Place this side down onto the back side of the fabric.
Set the iron to dry mode and press without sliding, holding about 10–15 seconds per spot.
[Notes]
Iron temperature varies by interfacing; please refer to the recommended temperature in the product description.
Use dry iron only; do not use steam.
Usage, suitable materials, iron temperature, and pressing time are guidelines. Please test with scraps before use.
When applied to sheer materials, adhesive resin may seep through or reduce transparency, so be cautious.
[Material]65% Polyester35% CottonMade in Japan
[Fabric Width]Approx. 90 cm
Brand:nomura tailorSKU:2-003-t121h-yTags: Craft & Sewing Accessories / Interfacing , Fabric / Shop by Fabric Type ( Gauze, Lace, Oxford, Tulle & More )/ Interlining Color:Y. White
Product details
[Product description]
Fusible interfacing is adhered to fabric with an iron.When making clothes, bags, or small items, applying interfacing to fabric prevents deformation and makes wrinkles less likely even after repeated washing.
Heavyweight Interfacing Nittobo［Hard］
A dense and firm interfacing.Recommended when you want large bags to stand upright.Usage: bags, etc.Suitable materials: canvas, No.10 oxford (thicker than regular oxford), katsuragi, etc.Recommended iron temperature for fusing: 140–160℃*May not fuse well with household irons.
*Please refer to the “Fusible Interfacing Comparison Chart” image for stiffness and thickness of interfacing.*In the second image, the gray board is placed on the right half.
[How to Use]
The side with a shiny (reflective) or rough surface caused by adhesive resin is the adhesive side. Place this side down onto the back side of the fabric.
Set the iron to dry mode and press without sliding, holding about 10–15 seconds per spot.
[Notes]
Iron temperature varies by interfacing; please refer to the recommended temperature in the product description.
Use dry iron only; do not use steam.
Usage, suitable materials, iron temperature, and pressing time are guidelines. Please test with scraps before use.
When applied to sheer materials, adhesive resin may seep through or reduce transparency, so be cautious.
[Material]65% Polyester35% CottonMade in Japan
[Fabric Width]Approx. 90 cm
Brand:nomura tailorSKU:2-003-t121h-yTags: Craft & Sewing Accessories / Interfacing , Fabric / Shop by Fabric Type ( Gauze, Lace, Oxford, Tulle & More )/ Interlining Color:Y. White
Fusible interfacing is adhered to fabric with an iron.When making clothes, bags, or small items, applying interfacing to fabric prevents deformation and makes wrinkles less likely even after repeated washing.
Heavyweight Interfacing Nittobo［Hard］
A dense and firm interfacing.Recommended when you want large bags to stand upright.Usage: bags, etc.Suitable materials: canvas, No.10 oxford (thicker than regular oxford), katsuragi, etc.Recommended iron temperature for fusing: 140–160℃*May not fuse well with household irons.
*Please refer to the “Fusible Interfacing Comparison Chart” image for stiffness and thickness of interfacing.*In the second image, the gray board is placed on the right half.
[How to Use]
The side with a shiny (reflective) or rough surface caused by adhesive resin is the adhesive side. Place this side down onto the back side of the fabric.
Set the iron to dry mode and press without sliding, holding about 10–15 seconds per spot.
[Notes]
Iron temperature varies by interfacing; please refer to the recommended temperature in the product description.
Use dry iron only; do not use steam.
Usage, suitable materials, iron temperature, and pressing time are guidelines. Please test with scraps before use.
When applied to sheer materials, adhesive resin may seep through or reduce transparency, so be cautious.
[Material]65% Polyester35% CottonMade in Japan
[Fabric Width]Approx. 90 cm
Brand:nomura tailorSKU:2-003-t121h-yTags: Craft & Sewing Accessories / Interfacing , Fabric / Shop by Fabric Type ( Gauze, Lace, Oxford, Tulle & More )/ Interlining Color:Y. White
Product information
COL-5db0317f220f95ec910bb66daa8be0e566537d88
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
